|
|
This site best viewed at 800x600
|
|
Eskie Pages- Dog Dish Stands!
Custom Made Dog Dish Stands!
As you may well know, one of the biggest
advantages to using dish stands is to "elevate"
the food, so dogs are not bending over nearly
as much to eat. This helps digestion, and
is easier on the bones and joints of older
dogs! We've also found that it helps keep
the dishes "in place", instead
of sliding around the floor as your dog eats.
Since we have two similar units, it also
has made for having "stations"...Jamie
has one and Shelby has one, and though side
by side, they know which one is which! We
initially made units that have two different
size dishes and also found this to be a great
feature. The larger quart size is for water,
while the smaller pint size is for food in
each stand. This helps keep the dishes specific,
and allows for a larger water dish than food
dish. With two dogs, this is even more handy!
Our stands are made individually, and can
be made to specific dimensions if so requested.
We can also make "special" styles
and other variations if it works out too!
We can make stands for most sizes of dogs,
so let us know if you have special needs
or requests! Please see more images below
and read further for more details on custom
stands!
|
|
Dog Dish Stands!
|
 
|
These are custom made units and we can make
variations and/or special setups if so desired.
Our "basic" unit is much like the
units we've used for Jamie and Shelby for
the past few years. We usually make the units
out of pine boards for the legs, and usually
use 1/2" plywood for the "table"
surface. In this, we cut out the two holes
for the dishes. We stick to a fairly "basic",
but practical design! And that's what matters
when it comes to feeding stations....practicality!
We do not normally put on a finish or paint
the basic units, but if you prefer, we can
put a clear coat(varnish) on it.....just
let us know!
Though the above image is for the "basic"
stand, please see further below for "optional"
styles of stands!
| Features of the basic dish stand: |
|
16" wide, 8" deep, and 8"
high!
|
|
One place for 1 quart size dish, and one
for 1 pint size dish.
|
|
Dishes are deep, flat-bottomed stainless
steel; and we include not just one for each
spot, but TWO. Thus, you get TWO quart size
dishes and TWO pint size dishes with the
unit! This allows you to have "spares"
and also so that you can have one set in
the sink while using the other! (2 dishes
for each station is standard for all stands
that we make!)
|
|
Price for one basic unit is $25, including
shipping within the US(there will be a bit
extra shipping elsewhere, so contact us first
if outside the US). Remember, this price
includes the stand, 4 dishes(two for EACH
spot), AND shipping within the US! For further
ordering information, see bottom of this
page!
|
We can make custom units, including those
with larger dishes, different heights, etc.
Thus, if you have special needs, drop us
a line, and we'll work on a custom order.
Pricing may be a bit different, but you can
roughly figure $10 PER "pint" station,
$15 PER "quart" station(or hole)
for each dish stand(larger dishes and/or
units may be more). Pricing structure "per
station"(a station is merely one hole/dish
cutout in a stand.....a regular stand will
have two stations...one for water and one
for food, but we can make multiple station
stands as well!). Below are the sizes of stations/dishes and
pricing we currently offer(special cuts and
other options may be additional):
| Size of Station: |
"Price" Per Station(by size!) |
| "Pint" Sized Station |
$10 each station |
| "Quart" Sized Station |
$15 each station |
| "2 Quart" Station |
$20 each station |
Thus, a unit with spaces for two 1 quart
size dishes and maybe 9" high would
run about $30. Two "pint" size
stations AND a middle "quart" size
station in the SAME unit(like picture shown
below) would run $35.00(10+10+15). These
costs also include shipping within the US,
AND ALL dish stands get two dishes for each
hole, so you get spares, and not just the
bare minimum! We can also make other "custom"
formats too, so feel free to drop us a line
on anything you'd like! So...if you've got
special needs, let us know and we'll work
on it!
Three "station" dish stand...two
feed dishes and one water dish in middle(this
is actually a photo of the one recently
made
for Jamie and Shelby....and it's working
just fine for them!)
|
A Custom three "station" stand,
made in a special "bone shaped"
cutout! This one shows 3 "quart"
sized dishes, and optional matching
placemat
beneath it. Special cuts are figured
by the
order, but this is usually just $5
extra
on top of the regular type stands.
Placemats
may be able to be made in certain cases,
so check with us first on them, for
availability
and pricing. |
|
 |
| To order a dish stand, please note what you
figure you will need for a stand, and
what
you might like. Sending an email note
to
us is the best way to reach us. Write
with
your request and we'll get to work
with you
on figuring an exact stand for your
needs!
Feel free to ask any questions that
you may
have. We don't usually keep a supply
of ready-made
stands handy, but we do keep materials
in
stock, so that when you are ready for
your
stand, we can make it to your needs
as specifically
as we can! Our mailing address is below
for
when the order is ready and you need
the
mailing address to send payment! |
Email Address:
pages@eskie.net
(yes, Michael will get the mail there as
well as his usual address!) |
(Postal Mailing address):
Eskie Pages
PO Box 422
Spooner, WI 54801 |
And, keep checking back to see when we add
other eskie/dog related items!
Well...make it a great day! :)
[ESKIE PAGES] [SUPERIOR PAGES] [ESKIE CENTRAL][CANINE COURT]
[ESKIE.NET FRONT PAGE]
Site designed and maintained by Eskie Pages.
